Mar-resistant end caps. Thick guide bracket engages full fly rail
Base and fly separate easily for use as an extension or two single sections. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok® feature. Rugged spring loaded locks operate smoothly. Slip-resistant Traction-Tred® D-rungs
Smooth operating pulley design - enclosed shape protects pulley. Extra heavy duty I-beam rails. Exclusive Alflo® rung joint means Twist-Proof® performance
Extra Heavy Duty Fiberglass Flat D Rung Extension Ladder
Orange non-conductive fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering.
Traction-Tred® 1-1/2"W deeply serrated aluminum flat D-rung. Interlocking side rails. Internal guides on bottom of fly section and external guides on top of base section. Combination aluminum rail shield bracket and shoe with extruded rubber slip-resistant shoe pad and spur plate. Twist-Proof® due to exclusive Alflo® rung joints. Pre-pierced holes at top of fly for field installation of accessories.
Orange non-conductive fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering.
Traction-Tred® 1-3/4"W deeply serrated aluminum flat D-rung. Polyethylene rung wear sleeves. Combination aluminum rail end shield and shoe with extruded rubber slip-resistant shoe pad and steel spur plate. Twist-Proof® due to exclusive Alflo® rung joints. Pre-pierced holes at top of fly for field installation of accessories.
Orange non-conductive fiberglass side rails with non-irritation fabric outer mat assures a smooth trouble-free surface even after weathering.
Features heavy gauge aluminum Tool-Tra-Top®. 4 solid 1/4" aluminum rivet attach top to each front and back rail. Back-up aluminum plate reinforces all top connectors. Heavy-duty 1-1/4" inside aluminum spreader bars. 3-1/4" extra wide Traction-Tred® deeply serrated aluminum steps, knee-braced and triple riveted. Full set of extra-strength knee-braced rear horizontals spaced one per foot. Lower rails reinforced with attached black non-conductive fiberglass rail shields to resist abuse. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad.
Extra heavy duty industrial. 300 lbs. duty rating, Type IA.
Orange non-conductive fiberglass side rails with non-irritation fabric outer mat assures a smooth trouble-free surface even after weathering.
Structural molded copolymer Tool-Tra-Top® holds quart paint cans and tools -- slotted for paint roller tray. Handy bucket holder clip. Internal steel spreaders protect against abuse, storage and transport damage. Double-riveted aluminum steps are deeply serrated for slip resistance. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Front rails 3-1/8"W. Flange 1-3/16"W. Rear Rails 1-7/8"W. Flange 1-3/16"W. Steps are 3"W. Top is 5-3/4"W x 13"L. Meets ANSI and OSHA Standards.
Little Giant Telescopic
Multipurpose Ladder System
One ladder does it all!
Four ladder styles, 34 configurations -- all in one.
Aluminum Ladders
It's an extension ladder, an A-frame stepladder (several sizes), a staircase ladder and 2 scaffold trestles. Wide flare base and skid-resistant feet increase safety. Stores away at 1/4 of its extension ladder height -- no need for ladder racks. All configurations have telescopic capabilities. Type 1A 300 lb. load capacity UL listed (184) & CSA certified (CAN3-Z11-M81). Includes instructional video and manual and a limited lifetime warranty.
Fiberglass Ultra-Lite Ladders
...same features as the Aluminum Stepladders, but made with tough non-conductive fiberglass resin. One year warranty.