Rugged Aluminum Truck Dock Boards

with Welded Aluminum Curbs

• Beveled Edges for Smooth Entry & Exit
• Designed for Low to Medium Traffic Applications

Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Rugged Aluminum Truck Dock boards with Welded Aluminum Curbs are available in 27 different dizes from 54"Wx36"L to 84"Wx72"L. Available capacities include 5,000 lbs, 6,000 lbs, 8,000 lbs, 10,000 lbs, 12,000 lbs, 15,000 lbs, and 20,000 lbs.

Capacity is based upon the heaviest type of equipment used plus the maximum load carried times the single axel rating or the total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered. Steel dock boards are recommended for high use docks.

Width of dock board chould be at lease 15" wider than the load or equipment passing between the curbs. if the load does not pass between the curbs but is elevated above, add 15" to the overall width of the equipment. (Good Rule of thumb is to subtract 5-6" from the dock board to achieve actual usable width)

Use this guide for truck floor heights to determine the Height Differential from the truck bed to dock. (Numbers listed referance an empty truck)

Most ship within 48 hours.